AWRA OpsHub Search
Intermediate Certificate on pass

The App on the Floor: Attendance Kiosk, NFC Tags, Printer, Scale and Widget

Turn a shared tablet into a clock-in kiosk that works offline, tap NFC stickers to open assets, print receipts and weigh goods over Bluetooth at the till, and use the Android widget, progress notifications, sharing and voice entry.

4 lessons 45 min 6-question assessment 70% to pass

What you’ll learn

  • Pair a shared device as an attendance kiosk, review its photo punches and revoke it
  • Pair an NFC sticker with an asset and open the asset by tapping it
  • Set up a Bluetooth receipt printer and scale for a phone’s till and weigh a line
  • Use the home-screen widget, progress notifications, Share to AWRA and voice entry on Android

Course content

4 lessons · 45 min of reading
01
Lesson 1 of 4 Practice 12 min

The attendance kiosk: pairing, punches and review

A kiosk is a phone or tablet at one attendance site where employees clock in and out. On the web, open the site under Attendance Sites & Clock Hours and find Kiosk devices; someone with the manage attendance sites permission enters a Device name such as Reception tablet and an Exit PIN of 4 to 8 digits, then clicks to set it up. A Pairing code like ABCD-2345 and a QR appear, shown only this once and valid for ten minutes. On the kiosk device, open the AWRA app signed out, tap Set up as an attendance kiosk, and scan the code or type it. Pairing needs the internet once; after that the kiosk also works offline.

At the kiosk an employee enters their Employee number and their self-service PIN and taps to clock in or out, and the front camera takes a photo with each punch. The photo is for your HR team to review; it is not face recognition and nobody is identified automatically. The punch follows the employee’s own clock-in rules: the five-attempt PIN lockout, the sites they are assigned to, the site’s geofence and clock hours, the shift’s late rule and the timesheet lock. If the kiosk is offline it says so, keeps each punch with its time and sends it, and checks it, when the connection is back; a punch that arrives late is marked synced late. Exit kiosk mode needs the exit PIN and a connection, and unpairs the device.

In practice: a Thika packhouse with no staff phones mounts a tablet by the gate. The HR officer pairs it from the web, and 140 workers clock in with employee number and PIN. When the site’s internet drops at 06:50, the screen shows Offline — punches are saved with their time, and the 06:52 punches reach AWRA at 07:30 marked synced late but timed 06:52. Each week she opens Attendance, Clock-in verifications, filter Kiosk punches, and checks photos against the employee. When the tablet is stolen, she clicks Revoke on Kiosk devices and it stops working on its next request.

Key takeaways

  • Pair a kiosk from the site’s Kiosk devices section with a one-time code valid for ten minutes, and an exit PIN.
  • Employees punch with employee number and self-service PIN; a photo is kept for review, not for face recognition.
  • Offline punches keep their original time, are checked when they arrive, and are marked synced late.
  • Review photos under Clock-in verifications, Kiosk punches; Revoke stops a device on its next request.
02
Lesson 2 of 4 Practice 10 min

NFC asset tags

On Android phones with NFC, an asset can carry a tag. Open the asset in the app and find the NFC tag card: tap Pair NFC tag and hold a sticker or card flat against the back of the phone. AWRA stores the tag’s hardware ID, which works on a blank sticker. Also write a link onto the tag is optional and puts the asset’s web address on the tag too, so a phone that is not in AWRA’s scanner still opens the asset; a read-only or locked tag still pairs without it. Pairing is checked on the server, so it needs a connection.

A tag belongs to one asset. If you hold up a tag already paired elsewhere, the app says Tag already in use and offers Move tag here. Unpair, on the card in the app or Unpair Tag on the asset page on the web, frees it; both need the edit assets permission. Once paired, the scanner’s Tap NFC tag mode, beside the camera, opens the asset from a tap, which works where a barcode label has worn off, is painted over or sits behind a panel.

In practice: a Kisumu hospital tags 300 infusion pumps whose barcode labels peel off after cleaning. A biomedical technician pairs a waterproof NFC sticker inside each pump’s handle and ticks Also write a link onto the tag. On ward rounds he taps each pump in the scanner to open its record and log the check. When a pump is written off, its sticker is moved to the replacement with Move tag here, and the old pump’s history keeps its own record.

Key takeaways

  • Pair NFC tag on the asset in the Android app stores the tag’s hardware ID; writing a link is optional.
  • One tag, one asset: a tag in use elsewhere offers Move tag here.
  • Unpair from the app card or from Unpair Tag on the asset’s web page; both need edit assets.
  • The scanner’s Tap NFC tag mode opens the asset from a tap.
03
Lesson 3 of 4 Practice 11 min

Bluetooth receipt printer and scale at the till

An Android phone used as a till can drive a classic Bluetooth receipt printer and a serial scale. Pair each device first in Android’s own Bluetooth settings, then open Printer & Scale from the POS screen. Under Receipt printer, pick the printer, choose the Paper width, tick Print the receipt after each sale if you want automatic printing, and use Test print. A sale captured offline prints a provisional receipt. Forget printer removes it. The pairing is stored on the phone, not on your account, because it belongs to that device.

Under Scale, pick the scale and use the live reading to check the format it sends. Unit when the scale sends none covers scales that send bare numbers, and Custom format and Steady when the line matches are optional settings for an unusual model. At the till, a line sold by weight opens the weighing sheet: it takes the first steady, non-zero reading and converts it into the line’s unit (kg, g, t or lb). An unsteady or overloaded reading is shown and never used, and the scale is connected only while the sheet is open.

In practice: a butchery in Eldoret runs its counter on an Android phone with a 58 mm Bluetooth printer and a bench scale. The owner pairs both in Bluetooth settings, picks them under Printer & Scale and runs a test print. A customer asks for 1.25 kg of beef: the cashier adds the item, places the meat on the scale, waits while the sheet says Settling…, and the steady 1.250 kg reading becomes the line’s quantity. The receipt prints as soon as the sale is paid.

Key takeaways

  • Pair the printer and scale in Android’s Bluetooth settings, then choose them under Printer & Scale.
  • Auto-print, paper width and test print are per phone; offline sales print a provisional receipt.
  • The weighing sheet uses only the first steady, non-zero reading and converts it to the line’s unit.
  • Unsteady or overloaded readings are shown and never used.
04
Lesson 4 of 4 Reading 12 min

Widget, progress notifications, sharing and voice

AWRA at a glance is an Android home-screen widget showing Approvals waiting, Sales today and Low stock; tap a figure to open it. It shows only the figures your role may see, and hides a tile rather than drawing a hidden figure as zero. It never fetches on its own: the app refreshes it when you open it or sign in, and yesterday’s sales figure shows as a dash after midnight rather than as today’s. After sign-out it reads Sign in to AWRA, so the last person’s numbers do not stay on the home screen. Progress notifications are quiet, ongoing notifications while something is under way, such as a stock count being walked, a cash drawer that is open or a delivery run on the road; tapping one opens that screen, and they never ring.

Share to AWRA appears in Android’s share sheet for PDFs and images. Pick a destination your role can use: Supplier bill sends the file to the Bills inbox to be read into a draft bill; Expense receipt opens a new expense claim with the files attached as receipts; Attach to a record files it in the Document Vault on a purchase order, purchase request, quotation or customer that you find by search. A share made while signed out waits until you sign in, and offline the files stay in the app until you are back online. Voice entry puts a microphone beside the reason and notes on check-in, check-out and adjustment screens and the reply on a ticket, and on an expense claim you can speak an item, for example taxi from the airport 1,500 yesterday; speech is handled by the phone’s own recognition service, and AWRA records no audio.

In practice: a branch manager in Nyeri puts AWRA at a glance on her home screen and sees four approvals waiting before she opens the app. A supplier WhatsApps her a PDF invoice; she shares it to AWRA as a Supplier bill and it lands in the Bills inbox for the accountant. During the monthly count, the progress notification shows the count is still open, and one tap returns her to it after a phone call. On the receiving dock she dictates “two cartons crushed, driver notified” into the check-in notes instead of typing with gloves on.

Key takeaways

  • AWRA at a glance shows approvals waiting, sales today and low stock, only for figures your role may see.
  • Progress notifications track a count, an open drawer or a delivery run quietly, and open the screen on tap.
  • Share to AWRA sends PDFs and images to the Bills inbox, a new expense claim or a record’s Document Vault.
  • Voice entry uses the phone’s own speech service; AWRA records no audio.

Finished the material?

Take the 6-question assessment and earn your certificate — 70% to pass.

Take the assessment

Help Center

Need a quick answer while you read?

Run inventory, procurement, assets, sales, and field work with approved AWRA guidance for setup, migration, integrations, security, pricing, and support.

Search all approved AWRA public help articles.

Open Help Center