One Unit, One History
A serial number is only worth recording if it is still telling the truth a year later. Here is one inverter followed from the supplier’s lorry to a customer’s roof and back to the counter, and what the record says about it at every step.
The short version
For an item with serial tracking on, every unit arrives with its own number, and every movement after that changes the unit’s status and writes a line on its timeline: sold at the till or on an invoice, in transit between branches, on a quality hold, sent back to the supplier, brought back by a customer. Look the number up and you see where that one unit is and how it got there. A customer return has to name units that were actually sold on that sale, so the record cannot be bent at the counter.
A customer walks into a solar equipment shop on Oginga Odinga Street in Kisumu with a 5 kVA inverter under his arm. It trips every afternoon when the fridge starts. He bought it three weeks ago, he says, and he wants it exchanged. The shop sells forty of that model a month. Was this one sold here, on which receipt, and is it the unit the shop thinks it is?
Without a serial register, the answer depends on the receipt and the customer’s memory. With a register that only records the number on arrival, the answer is “we received it in July”, which helps nobody at the counter. The useful answer is the whole life of that one unit, written down as it happened. That is what serial tracking in AWRA OpsHub keeps, and the easiest way to show it is to follow one inverter from the day it landed.
Day one: it arrives with its own number
Serial tracking is switched on per item. For an item that has it on, a receipt must carry exactly one serial number per unit. Receive twelve inverters and the receipt wants twelve numbers, typed, pasted one per line or scanned; eleven is refused with the count it expected. A number that is already in stock or already on its way between branches is refused too, so the same unit cannot be registered twice.
A serial-tracked quantity is always whole. Two and a half inverters is a typing mistake, and the system says so rather than rounding it, because half a unit is something nobody can put a number on. Items sold by the kilo or the metre work the other way, which is in selling two and a half kilos.
Our inverter, serial INV5K-2207-0418, lands in the main store in Kisumu with status available. Its timeline gets its first line: in, received, the warehouse and bin, and the receipt document it came on.
Every status the unit can hold
| Status | What put it there | In stock? |
|---|---|---|
| Available | A receipt, an arrival at another branch, a restocked return, or a supplier return reversed | Yes |
| Sold | A till sale, or the checkout of a customer invoice | No |
| Issued | Any other check-out: to a project, a department, an assembly, a disposal | No |
| In transit | Dispatched on a transfer, not yet received | On the road |
| Missing | Dispatched on a transfer and not among the units that arrived | No |
| Held | Placed on a quality hold or inspection | In the building, not for sale |
| Returned to supplier | An approved supplier return | No |
| Customer returned | Brought back at the till and not put back on the shelf | No |
Each change writes a line on the unit’s timeline: when, in or out, the event, the warehouse and bin, and the document behind it. “Where has this unit been?” is then a page, not an investigation.
Week two: a branch asks for stock
The Kakamega branch runs low and the store sends six inverters up the road. The transfer has to name the six serials it is sending, and each must be available in the Kisumu store. On dispatch they go in transit. When Kakamega receives the transfer, the units that arrived become available there. If the driver delivers five, the sixth number does not quietly reappear in Kakamega: it is marked missing, and stays that way until it is found or written off.
Our inverter was not on that lorry. It stayed in Kisumu, available, and its timeline did not change, which is also information.
Week three: the sale
At the till the cashier scans the serial sticker on the box. The till looks the number up among units in stock at the counter’s own warehouse, finds the item it belongs to and adds the line with that serial already on it. A number that is not in stock there is not found, so a unit that left last week cannot be sold a second time by mistake. On payment, INV5K-2207-0418 becomes sold, and its timeline records the sale and the receipt number.
The same is true for a trade sale. When a contractor buys ten units on account, the invoice checkout names the ten serials, and approving the checkout marks them sold against that invoice. A check-out that is not a sale, such as stock issued to the shop’s own installation job, marks units issued instead, so the register can tell a sale from internal use.
A register that only records arrivals answers the question nobody asks. The useful record is the last thing that happened to the unit.
Back at the counter
Now the customer with the tripping inverter. The cashier opens his sale and starts a return. The return accepts only serial numbers that were sold on that sale line and have not already come back. Type a different number, from a unit sold to someone else or one still on the shelf, and the return is refused with the numbers that line did sell. Returning everything that is left on the line fills in the serials automatically.
The unit is fine: the customer changed his mind, or bought the wrong size
Return it to stock
The same serial record becomes available again at the shop’s warehouse, with a line saying it came back on that return. No duplicate number is created.
The unit is faulty and must not be sold again
Return it without restocking
The unit is marked customer returned. It is no longer with the customer and not in stock either, so the till cannot sell it and the count does not expect it on the shelf.
This inverter trips under load, so it goes back without restocking. The customer leaves with a replacement, which is a fresh sale of a different serial, and both units now tell their own story.
When the batch goes back to the supplier
Suppose the shop then finds four more units from the same consignment with the same fault and returns them to the importer. A supplier return names the serials going back, each must be available at the warehouse it leaves from, and approving the return marks them returned to supplier. If the importer refuses the return and the shop reverses it, the units come back into stock and their serials become available again, rather than sitting in a status that no longer matches the shelf. The money side of a return is a separate story, told in Sending It Back to the Supplier.
Starting with stock already on the shelf
Most shops switch tracking on for an item that already has stock, with no record of those units’ numbers. That stock is not locked. Units on the shelf with no registered serial can still be sold without one, while every new receipt must bring a number per unit. Once the unregistered units are used up, every unit leaving has to be named. The register fills up in the normal course of trade instead of needing a stock-take on day one.
The switch that will not turn off
Serial tracking cannot be switched off for an item while any of its registered units are available or in transit. While it was off, nothing would update the register, and switching it back on would offer units that left months ago as still on the shelf.
What AWRA OpsHub does today
- One serial number per unit on every receipt, refused if the count is wrong or the number is already in stock or in transit.
- Eight statuses kept up to date by every movement: available, sold, issued, in transit, missing, held, returned to supplier and customer returned.
- A timeline per unit, with when, in or out, the event, the warehouse and bin, and the document, found by the serial number itself.
- Serial scan at the till that finds the unit among stock at that counter’s warehouse.
- Till returns limited to the serials sold on that line, restocked to available or kept aside as customer returned.
- Gradual adoption, so stock received before tracking can still leave unnamed while new stock must carry numbers.
More we can add to your workspace
- A warranty end date on each unit, set from the supplier’s terms when it is received and shown at the counter when it comes back. Commission it
- The supplier and purchase order on the unit’s own page, so a fault pattern can be traced to one consignment in one click. Commission it
- A faulty unit sent from a customer return straight back to its supplier under warranty, without passing through sellable stock. Commission it
- Custody of a serialised unit by person, for tools and demo units handed to staff. Commission it
Where we point you to a specialist
- We do not decide whether a fault is covered by a warranty. The record shows when the unit was sold and what happened to it; the warranty terms and the judgement belong to the supplier and to you.
The warranty date per unit is the extension dealers ask for first, and the field for it already exists on every serial record.
From a history to a warranty desk
The register, the statuses and the till checks are in place. These are the extensions that turn the history into faster warranty handling.
Warranty end per unit
Set at receipt from the supplier’s terms, shown when the unit is scanned at a return.
Consignment on the unit page
The supplier and purchase order beside the timeline, for spotting a bad batch.
Customer fault to supplier claim
A customer-returned unit raised straight onto a supplier return.
Three questions for any serial register
After a unit is sold, what does its record say?
What you will probably hear
It shows when it was received.
How to read it
Then the register is a receiving log. Ask whether the sale, the transfer and the return each change the unit’s status.
Can a cashier accept a return of a serial that was never sold on that receipt?
What you will probably hear
The cashier checks the box.
How to read it
A check that depends on someone remembering is how a swapped unit gets through. The return should refuse a number the sale did not include.
We already have stock on the shelf. Do we have to count every serial before we start?
What you will probably hear
Yes, a full stock-take first.
How to read it
That is why many shops never switch tracking on. Ask whether existing stock can leave unnamed while new stock is registered.
See inventory traceability
Serials, batches and the timeline behind every unit, from receipt to sale.
Explore traceabilityFrequently asked questions
Do we have to enter a serial number for every unit we receive?
For an item with serial tracking on, yes: a receipt needs exactly one serial per unit, and a number already in stock or in transit is refused. Items without tracking are received as quantities as before.
What happens to the serial when a customer returns the unit?
The return must name serials that were sold on that sale line and not already returned. If the unit goes back on the shelf, the same serial record becomes available again. If it is kept aside as faulty, it is marked customer returned and cannot be sold.
Can we switch serial tracking on for an item that already has stock?
Yes. Units already on the shelf with no registered serial can still be sold without one. New receipts must carry a serial per unit, and once only registered units are left, each unit leaving must be named.
Can a serial-tracked item be sold in fractions?
No. A serial names one physical unit, so serial-tracked quantities are always whole and a fraction is refused rather than rounded.
Where do we see the history of one unit?
On the unit’s own traceability page, found by its serial number. It shows the current status and a timeline of every movement with the date, the place and the document behind it.