AWRA OpsHub Search

AWRA Help Center

Copy link
Assets Custody Audit
01 Assets Module Guides 02 Asset Register Assets 03 Asset Labels & Scanning Assets

NFC Tags & Handover From The Phone

Pair an NFC sticker or card with an asset so a tap opens it, take both custody signatures on one phone when an asset changes hands, and record who a work order goes to and the meter reading.

These are field tools in the AWRA mobile app. NFC pairing needs an Android phone with an NFC reader. The app has no NFC support on iPhone, and the NFC card is hidden on any phone without a reader unless the asset already has a tag.

Permissions

  • Pairing or unpairing a tag needs the edit assets permission (edit_assets).
  • Signing a custody handover needs the move assets permission (move_assets), the same right as recording the movement.
  • Choosing a work order assignee or repair vendor needs manage_asset_maintenance.

Pair An NFC Tag (App)

  1. Open the asset in the app and find the NFC tag card. If NFC is switched off, tap Turn on NFC to open the phone’s settings.
  2. Leave Also write a link onto the tag on if you want the tag to carry a link to the asset, or turn it off for a read-only tag.
  3. Tap Pair NFC tag and hold the tag flat against the back of the phone until it vibrates.
  4. The card shows Paired, the tag ID and when it was paired.
  • The pairing uses the tag’s own hardware ID, so a blank sticker works. The written link is a convenience for other phones. If it cannot be written, the tag is still paired and the app says Paired without a link.
  • One tag belongs to one asset in your workspace. If the tag is on another asset, the app shows Tag already in use with that asset’s name. Tap Move tag here to move it.
  • A retired asset cannot take a new tag.
  • Pairing needs a connection, because the server checks whether another asset holds the tag.
  • To change tags, tap Pair a different tag. To remove it, tap Unpair.

Tap A Tag To Open The Asset

With the app’s scanner open, tap a paired tag against the phone to open its asset, the same as scanning its label. See Asset Labels & Scanning for printed labels and barcodes.

On The Web

The asset page shows the paired tag and lets someone with edit assets unpair it. After unpairing, tapping the tag no longer opens the asset. Pairing a new tag needs a phone to read the chip, so it happens in the app.

Custody Handover Card (App)

When a movement passes an asset from one holder to another, the movement shows a Custody handover card with two signatures, taken on the same phone:

  1. Releasing custodian signs. The person handing the asset over draws their signature and checks their printed name, then taps Save release, then pass the phone.
  2. Receiving custodian signs. The phone goes to the person taking the asset. They sign and tap Confirm receipt.
  3. Both marks show on the card. It then says Handover signed. These marks can no longer be changed.
  • Each signature can be taken once. It cannot be signed again or overwritten.
  • If nobody held the asset before the movement (for example, it came out of the store), there is no release step and the card goes straight to the receipt.
  • A rejected or cancelled movement cannot be signed.
  • A pending movement can be signed. A completed or approved movement can be signed only within 30 minutes of when it happened.
  • Signing needs a connection. Offline, the button is disabled and the card says Signing needs a connection.
  • The handover card also works for quantity-pool movements.

For what a captured mark does and does not prove, see Signature Capture.

Work Order Assignee And Meter Reading (App)

  • Assigned To: search staff by name and choose who does the work, or choose Unassigned.
  • Repair Vendor: search vendors by name, or choose In house.
  • Meter Reading and Unit (for example, hours or km): optional. Enter them when you report, edit or complete a work order. Leave the reading blank if you did not read the meter. Blank is not the same as zero.

See Asset Maintenance & Work Orders for the rest of the work order.

Common Issues

  • No NFC tag card on the asset: the phone has no NFC reader, or it is an iPhone.
  • NFC unavailable or NFC is switched off: turn NFC on in the phone’s settings and try again.
  • Tag not read: hold the tag flat against the back of the phone and try again.
  • That does not look like an NFC tag ID: tap the tag again.
  • No Pair button: you lack edit assets, you are offline, or the asset is retired.
  • No signature pad on the handover card: you lack move assets, both parties have signed, or the 30-minute window after a completed movement has passed.
  • Signature not kept: the movement and name were saved, but the drawing could not be stored.
Related guide: Asset Movements covers check-outs, returns and expected return dates. Asset Custodians covers who holds what.

Need help with this topic?

Capture the module, record number, branch or warehouse, user, visible message, and what you expected to happen before contacting support.

Open support guide