Attendance Kiosk Mode
Turn a shared phone or tablet into the clock-in point for one attendance site. Employees clock in and out at it with their employee number and self-service PIN. Nobody signs in to the device.
Kiosk mode suits sites where staff do not carry a registered phone, or where you want one fixed device at the door. It runs in the AWRA mobile app. The web app is where you create pairing codes and revoke kiosks, and you can do both in the app too.
Kiosk Mode Or The Web Kiosk Display?
- Kiosk Display (web): a screen showing the site’s QR code, which changes every 30 seconds. Employees scan it with their own registered device as part of Verified Clock-In. The clock-in happens on the employee’s phone.
- Kiosk mode (app): the clock-in happens on the shared device itself. The employee types their employee number and PIN, and the device takes a front-camera photo. No personal phone is needed.
Who Can Set It Up
Creating pairing codes and revoking kiosks needs the permission to manage attendance sites (manage_attendance_sites), the same permission that lets you edit the site. Employees who clock in at a kiosk need self-service turned on and a self-service PIN from HR (see Employee Self-Service).
Pair A Device
- On the web, open Human Resources → Attendance Sites, edit the site and scroll to Kiosk devices. In the app, open Attendance sites and open the site’s Kiosk devices sheet.
- Enter a Device name (for example, Reception tablet) and an Exit PIN of 4 to 8 digits. Keep the exit PIN to administrators. It is needed to take the device out of kiosk mode.
- Click Set up a kiosk device. A QR code and an 8-character pairing code (like ABCD-2345) appear. The code works once, expires after ten minutes, and is shown only this one time.
- On the kiosk device, open the AWRA app while signed out and tap Set up as attendance kiosk.
- Tap Scan the pairing QR, or type the code and tap Pair this device. The device opens in kiosk mode, showing the site name and the time.
Pairing needs an internet connection. After that, the kiosk also works offline. A paired device goes straight back into kiosk mode when the app is reopened.
Clocking In And Out At The Kiosk
- Enter your Employee number and your self-service PIN on the keypad.
- Tap Clock in / out and take the photo. A punch without a photo is not recorded.
- The screen shows Clocked in, Clocked out or Not recorded with the reason, then clears for the next person.
- You do not choose in or out. If you are clocked in today, the punch clocks you out. A night shift that crosses midnight is clocked out on the next day.
- A second punch within two minutes of clocking in is treated as a double tap, not a clock-out.
- The kiosk applies the same rules as your own clock-in: the PIN lockout after five wrong attempts, your assigned sites, the site’s clock hours, your shift’s late rule and the timesheet lock.
- When the device sends its location, it must be inside the site’s radius.
- The photo is kept for HR to look at. It is not face recognition. Nobody is identified automatically.
When The Kiosk Is Offline
With no connection, the kiosk saves each punch with its original time and shows Saved at that time. It sends the saved punches when the connection is back, and the server checks them then. A punch that arrives more than three minutes late is marked as synced late, and the attendance record notes it. A saved punch older than 72 hours is not applied; HR records it as a correction. Punches that were sent later but refused are listed on the kiosk under Sent later but not recorded.
Revoke Or Exit A Kiosk
- Revoke: in the site’s Kiosk devices list (web or app), click Revoke. The kiosk stops on its next request and shows This kiosk was switched off. It needs a new pairing code to work again.
- Exit: on the kiosk, tap the lock icon, enter the exit PIN and tap Exit kiosk. Exiting needs a connection and unpairs the device. If saved punches have not been sent yet, connect the device first. Five wrong exit PINs pause attempts for a few minutes.
- The list shows each device’s last-seen time, app version, who paired it and whether it is Active or Revoked.
Reviewing Kiosk Punches
Every kiosk punch, accepted or refused, is logged with its photo on the Clock-in verifications page. The Kiosk devices section links straight to it, filtered to kiosk punches.
Common Issues
- That code is not valid: the code was already used or is more than ten minutes old. Create a new one.
- That employee number and PIN do not match: check both. The same message is shown for an unknown number, so the keypad cannot reveal who works there.
- Your PIN is locked or has expired: HR resets or reissues the self-service PIN.
- You are not assigned to this site: add the site to the employee in their Attendance Verification card.
- Refused as outside the radius: the device reports a location away from the site. Check the device’s location setting or the site radius.
- Refused outside clock hours, or because the month’s timesheet is locked: file a correction for time genuinely worked.
Need help with this topic?
Capture the module, record number, branch or warehouse, user, visible message, and what you expected to happen before contacting support.